Trainings
FTZ Training center
(Data updated on September 2023
In order to make the most of the features of our software, FTZ offers a range of specialized training programs. These programs emphasize enhancing the skills of trainees with a focus on productivity, quality, and a quick return on investment.
We recommend participating in the training programs offered by the FTZ Training Center to benefit from financing support through your OPCO.
All our training programs are certified with Qualiopi.
The quality certification has been granted for the following category of actions: TRAINING ACTIONS
Our trainings
Master the functionalities of the SchemELECT software
Day 1 – 7 hours
- Introduction and Ice-breaking
- Software presentation
- Project creation methodology
- Completion of Part 1 of the project file
- Spider diagram
- Distribution diagram
- Power diagram
- Control diagram
- Linking contacts with master symbol
Day 2 – 7 hours
- Review of Day 1 learnings
- Creation of a symbol library
- Completion of Part 2 of the project file
- Cross-references
- PLC
- Wire numbering management
- Terminal and cable generation
- Frame creation
Day 3 – 7 hours
- Review of Day 2 learnings
- Manipulation of terminals and cables
- PLC management basics
- Listings and Bill of Materials
- Introduction to cabinet layout
- Validation, PDFTM and DWGTM export, printing
- Overall validation of learnings
Target audience:
- Technicians and engineers from Design Offices
- Draftsmen / Designers from Design Offices
- Maintenance Technicians / Electricians
- All employees in the company involved in industrial electrical drawings
Prerequisites:
- Computer usage and familiarity with the Windows environment
- Pre-installation of the software if participating in remote training
Training objectives:
- Be able to create electromechanical files using dedicated functions in the software: diagrams, terminals, cabinets, bill of materials
Training duration:
- 3 days, 21 hours of training (3 x 7 hours)
Number of participants:
- Maximum of 10 trainees, 1 PC per trainee
Teaching method:
- The instructor provides theoretical and demonstrative information. Then, the trainees apply the concepts through practical exercises.
Validation of acquired skills:
- The instructor verifies the correct completion of exercises and provides additional explanations if needed. A certificate of completion is provided at the end of the session.
Master the functionalities of the SchemBAT software
Day 1 – 7 hours
- Introduction and Ice-breaking
- Creation/modification of environments
- Folder creation
- Layout and sizing of background plan
- Folio management
- Edition of background plan in AutoCADTM file and/or image
- Completion of title block information
- Creation of zones
- Installation and identification of devices
- Global functions on devices
- Generation of legend
- Review of Day 1 learnings
Day 2 – 7 hours
- Edition of the Devices database
- Creation of a device in general library
- Connection(s) for lighting control
- Association of devices in the same duct
- Installation/Identification of panel
- Installation of center pots
- Wiring of center pots
- Wiring of direct lines
- Wiring of inter-panel power supply lines
- Partition drop box and sleeves
- 3D preview of wiring elements
- Review of Day 2 learnings
Day 3 – 7 hours
- Graphic modification of ducts
- Length calculation parameter setup
- Wire setup parameter
- Edition of wire and cable database
- Generation of duct lists
- Duct labels
- Generation of device lists
- Presentation
- Introduction to single-line diagram
- Introduction to panel
- Printing
- Export to DWGTM/DXFTM, PDFTM
- Edition of frames
- Machine file (Processing/Circuit/Text Parameter)
- Review of Day 3 learnings
Target audience:
- Technicians and engineers from Design Offices
- Draftsmen / Designers from Design Offices
- Maintenance Technicians / Electricians
- All employees in the company involved in building electrical plans
Prerequisites:
- Computer usage and familiarity with the Windows environment
- Pre-installation of the software if participating in remote training
Training objectives:
- Be able to create wiring documents using dedicated functions in the software, including layout, wiring, and bill of materials
Training duration:
- 3 days, 21 hours of training (3 x 7 hours)
Number of participants:
- Maximum of 10 trainees, 1 PC per trainee
Teaching method:
- The instructor provides theoretical and demonstrative information. Then, the trainees apply the concepts through practical exercises.
Validation of acquired skills:
- The instructor verifies the correct completion of exercises and provides additional explanations if needed. A certificate of completion is provided at the end of the session.
Master the functionalities of the SchemPID software
Day 1 – 7 hours
- Introduction and Ice-breaking
- Project creation methodology
- Creation of a cover page, filling in the title block
- Creation/modification of the first P&ID (Part 1)
- Piping
- Equipment
- Piping components
- Filling in symbols
- Filling in diameters and products
Day 2 – 7 hours
- Review of Day 1 learnings
- Creation/modification of a symbol library
- Graphic part
- Connectivity part
- Creation of the second part of the first P&ID
- Instrumentation
- Line numbering
- Creation of the second P&ID
- Plan verification
Day 3 – 7 hours
- Review of Day 2 learnings
- Creation of frames
- Finalization of the P&ID document
- Equipment information
- Nomenclature and lists
- Translation
- Document validation
- Export to pdfTM, dwgTM
- Printing
- Overall validation of acquired skills
Target audience:
- Technicians and engineers from Design Offices
- Draftsmen / Designers from Design Offices
- Maintenance Technicians / Electricians
- All employees in the company involved in piping and instrumentation plans
Prerequisites:
- Computer usage and familiarity with the Windows environment
- Pre-installation of the software if participating in remote training
Training objectives:
- Be able to create piping and instrumentation documents using dedicated functions in the software, including P&ID diagrams, bill of materials, and lists
Training duration:
- 3 days, 21 hours of training (3 x 7 hours)
Number of participants:
- Maximum of 10 trainees, 1 PC per trainee
Teaching method:
- The instructor provides theoretical and demonstrative information. Then, the trainees apply the concepts through practical exercises.
Validation of acquired skills:
- The instructor verifies the correct completion of exercises and provides additional explanations if needed. A certificate of completion is provided at the end of the session.
Specific to request
Depending on the requests of the principal, the pace of the trainees and their questions, the trainer is able to adapt the program if necessary.
Place of training
The training is carried out in suitable premises in accordance with the requirements of the Qualiopi standard. This point is checked by the training organization before the start of the training.
Training can also be delivered remotely.
Access map to the FTZ training center:
Accommodation addresses near the FTZ Training Center can be provided upon request by formation@ftz.fr.
Our contact details
Company: FTZ
23, Rue Antoine de Saint-Exupéry
ZAC de Frocourt
54710 FLEVILLE-DEVANT-NANCY
Email: formation@ftz.fr – Tel: +33(0)3.83.35.05.78
Registered training organization with DIRECCTE Nancy under activity declaration number: 41540033554
SARL with a capital of 138,118 € – SIRET 32075337900058
APE Code: 6209Z VAT number: FR70320753379
Technical means
For the realization of the trainings in our center, the technical means used are:
- Equipped room with one PC per learner and installed software licenses
- Whiteboard
- Projector
- Lunch included
To carry out training on customer sites, the technical means used are:
- Equipped room with one PC per learner
- Software licenses installed by the client
- Whiteboard
- Projector
- Free parking
For the realization of distance training, trainees must have the following technical means:
- One PC per learner with installed software licenses (provided by FTZ)
- PC equipped with audio output and microphone
- Teams video-conferencing software
In addition to the upstream and downstream questionnaires (beneficiary needs analysis grid in conjunction with the sponsor, establishment of a summary document in relation to the positioning procedure), a formative evaluation takes place throughout the training, adapted according to practical cases and scenarios.
Assessment methods
Questionnaire upstream about 1 week before the start of the training course and questionnaire at the end of the training to check the achievements (on the spot).
Between three and six months after the end of the training, we will organize a videoconference (approximately 1 hour) allowing everyone to express themselves and assess their achievements, identify new challenges and share good practices (assessment Cold)
Prices
The educational cost is defined from 800 euros excluding tax per day: tailor-made estimate, according to the following items:
Intra or inter training session
Number of trainees
Face-to-face and/or remote
Customer specific request
Dates of training sessions
The FTZ Training Center regularly organizes training sessions on various software programs (approximately 1 per month). Dates are provided upon request at formation@ftz.fr.
Access methods and deadlines
The instructing client may (depending on the estimate specifying the maximum number of trainees), register a new trainee for the training up to 72 hours before the start of the session, provided that the registration file is complete at the time of demand.
Result indicators (2023)
Overall satisfaction rate: 95%
Recommendation rate: 100%
Number of trainees: more than 180 trainees from 2022
Success rate: 98%
Témoignages
PDS accessibility
The training rooms are compliant with accessibility for people with reduced mobility. If you think that one of the future beneficiaries could have a disability, and for any question, including accessibility, you can contact our disability referent:
Nathalie FUND
Email: formation@ftz.fr
Such. : 03.83.35.05.78
Monday to Friday from 9:00 a.m. to 12:00 p.m. and from 2:00 p.m. to 5:00 p.m.
Response commitment within 72 hours.